PRODUCT DESCRIPTION The Tenda TEF1210P-8-150W is a 10 port PoE (Power over Ethernet) network switch with 8x 10/100Base-TX RJ45 ports, 2x 10/100/1000Base-T RJ45 Gigabit ports and 2x 1000Base-X SFP combo ports. The first 8 ports (1-8) are IEEE 802.3af PoE (15.4w) and IEEE 802.3at PoE+ (30w) compliant and in total, this switch can provide 123w of PoE output. When using Cat5 twisted pair cabling, the TEF1210P-8-150W can provide data and power for Access Points, IP cameras, IP phones and other PoE devices. When using Cat5e however and enabling extended mode, the transmission distance of the data and power can reach up to 250 meters. Additionally, this switch also supports QVLAN, link aggression, QoS, MAC binding etc, which can help to reduce network deployment costs, time and energy. Due to the various applications for POE there is often a requirement to run cables further then the recommended 100m. This is a common problem for CCTV and WIFI installations where the nodes are distributed throughout a larger building. The Tenda TEF12 series PoE monitoring switches adopt an exclusive patented network extension technology, utilising standard twisted pair cable, it can support 250 metres of data and power transmission. Reliability and Security The TEF1210P-8-150W features PSE short-circuiting protection, PoE overloading, power over temperature, over voltage and surge current protection. FEATURES - 8 10/100Base-TX RJ45 ports, 2 10/100/1000Base-T RJ45 ports and 2 100/1000Base-X SFP combos - 8 10/100Base-TX RJ45 ports support PoE power supply. The total power output is up to 123W and the maximum output of a single port is 40W - Powerful port management functions, including port mirroring, speed limit, trunk, etc - Supports Web, SNMP management and network diagnostics maintenance methods - Supports IEEE 802.3Q Tag VLAN
SPECIFICATIONS
| Hardware | |
| Standards & Protocols | IEEE 802.3、 IEEE 802.3u、IEEE 802.3z、IEEE
802.3ab、 IEEE 802.3x、IEEE 802.1D、IEEE 802.1W、IEEE 802.1Q、 IEEE
802.3af、IEEE 802.3at |
| Switching capacity | 5.6 Gbps |
| Throughput | 4.22Mpps |
| Dimensions (W × D × H) | 294mm * 178.8mm * 44mm |
| MTBF | ≥100,000 hours (about 11 years) |
| Interfaces | 8 10/100Mbps RJ45 Ports (Data/PoE) 2 10/100/1000Mbps RJ45 Ports (Data) 2 100/1000Mbps SFP Slot (Data) (Auto Negotiation/Auto MDI/MDIX) |
| Port lightning protection | ≥6KV |
| Capacity Wire-speed forwarding Forwarding mode Mac Address Table | Support Store-forward and cut-through 4K |
| PoE Supply | Port 1 to Port 8 support standard IEEE802.3at/af power (maximum power for each port is 40W) PoE power type is end-span (12+, 36- and 45+, 78- line pair) |
| Input Voltage | AC：100-240V～ 50/60Hz |
| Power consumption | in full configuration: <150W Power Supply: 123W |
| Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
| Software
Features | |
| PoE management | Support over temperature protection for PoE module Support graphical management, detection of PD equipment |
| VLAN | Supports up to 18 VLAN IDs Port VLAN Supports up to 31 VLAN IDs 802.1Q VLAN |
| Security | MAC-Port Binding |
| Link aggregation | Static Trunk Supports 3 groups of 4-Port trunk
support |
| STP | STP/RSTP |
| IGMP Snooping | IGMP (v1/v2) Snooping |
| Port Mirroring | N: 1 port mirroring |
| QoS | 802.1p and DSCP priority re-marking Flow control Flexible queue scheduling algorithm can be set based on port and queue, support SP, WRR, |
| Firmware upgrade | Upgrade via the Web |
| Management and maintenance | Support SNMP v1/v2 and WEB-based management |
| Management and maintenance | Support SNMP v1/v2 and WEB-based management |
| Certification | FCCC, CE, RoHS |
